Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 680
Command Example: show ip mroute static, Parameters, Command Modes, Command, History
View all Dell Force10 S60-44T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 680 highlights
www.dell.com | support.dell.com Parameters static group-address [source-address] active [rate] count summary (OPTIONAL) Enter the keyword static to view static multicast routes. (OPTIONAL) Enter the multicast group-address to view only routes associated with that group. Enter the source-address to view routes with that group-address and source-address. (OPTIONAL) Enter the keyword active to view only active multicast routes. Enter a rate to view active routes over the specified rate. Range: 0 to 10000000 (OPTIONAL) Enter the keyword count to view the number of multicast routes and packets on the E-Series. (OPTIONAL) Enter the keyword summary to view routes in a tabular format. Command Modes EXEC EXEC Privilege Command History Version 8.3.3.1 Introduced on S60 Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series legacy command Example 1 Figure 24-2. Command Example: show ip mroute static Force10#show ip mroute static Mroute: 23.23.23.0/24, interface: Lo 2 Protocol: static, distance: 0, route-map: none, last change: 00:00:23 Force10# Example 2 Figure 24-3. Command Example: show ip mroute Force10#show ip mroute IP Multicast Routing Table (*, 224.10.10.1), uptime 00:05:12 Incoming interface: GigabitEthernet 3/12 Outgoing interface list: GigabitEthernet 3/13 (1.13.1.100, 224.10.10.1), uptime 00:04:03 Incoming interface: GigabitEthernet 3/4 Outgoing interface list: GigabitEthernet 3/12 GigabitEthernet 3/13 (*, 224.20.20.1), uptime 00:05:12 Incoming interface: GigabitEthernet 3/12 Outgoing interface list: GigabitEthernet 3/4 Force10# 680 | Multicast