Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 502
Unfragmented packet: Gi 1/6, show port-channel-flow Command for MAC Addresses
View all Dell Force10 S60-44T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 502 highlights
www.dell.com | support.dell.com Example show port-channel-flow outgoing-port-channel number incoming-interface interface source-mac address destination-mac address • Load-balance is configured for MAC • Load balance is configured for IP 4-tuple/2-tuple for the C-Series and S-Series • A non-IP payload is going out of Layer 2 LAG interface that is a member of VLAN with an IP address. Figure 15-46. show port-channel-flow Command for MAC Addresses Force10#show port-channel-flow outgoing-port-channel 1 incoming-interface gi 3/0 source-mac 00:00:50:00:00:00 destination-mac 00:00:a0:00:00:00 Egress Port for port-channel 1, for the given flow, is Te 13/01 Example Related Commands On the E-Series only: show port-channel-flow outgoing-port-channel number incoming-interface interface source-ip address destination-ip address {protocol number [icmp/tcp/udp]} {source-port number destination-port number} • Load balance is configured for IP 5-tuple/3-tuple. • An IP payload is going out of a Layer 2 LAG interface that is a member of a VLAN with an IP address. Force10#show port-channel-flow outgoing-port-channel 2 incoming-interface gi 3/0 source-ip 2.2.2.0 destination-ip 3.2.3.1 protocol tcp source-port 5 destination-port 6 Egress Port for port-channel 2, for the given flow: Unfragmented packet: Gi 1/6 Fragmented packets (first fragment): Gi 1/12 Fragmented packets (remaining fragments): Gi 1/12 load-balance (E-Series) Balance traffic over E-Series port channel members. 502 | Interfaces