Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 736

www.dell.com | support.dell.com Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S-Series Introduced on C-Series Introduced on E-Series Example Figure 26-11. Command Example: show ip ospf process-id database opaque-area (Partial) Force10>show ip ospf 1 database opaque-area OSPF Router with ID (3.3.3.3) (Process ID 1) Type-10 Opaque Link Area (Area 0) LS age: 1133 Options: (No TOS-capability, No DC, E) LS type: Type-10 Opaque Link Area Link State ID: 1.0.0.1 Advertising Router: 10.16.1.160 LS Seq Number: 0x80000416 Checksum: 0x376 Length: 28 Opaque Type: 1 Opaque ID: 1 Unable to display opaque data LS age: 833 Options: (No TOS-capability, No DC, E) LS type: Type-10 Opaque Link Area Link State ID: 1.0.0.2 Advertising Router: 10.16.1.160 LS Seq Number: 0x80000002 Checksum: 0x19c2 --More-- Table 26-7. Command Example Descriptions: show ip ospf process-id database opaque-area Item LS Age Options LS Type Link State ID Advertising Router Checksum Length Opaque Type Opaque ID Description Displays the LSA's age. Displays the optional capabilities available on router. The following options can be found in this item: • TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. • E or No E is displayed on whether the originating router can accept AS External LSAs. Displays the LSA's type. Displays the Link State ID. Identifies the advertising router's ID. Displays the Fletcher checksum of the an LSA's complete contents. Displays the length in bytes of the LSA. Displays the Opaque type field (the first 8 bits of the Link State ID). Displays the Opaque type-specific ID (the remaining 24 bits of the Link State ID). Related Commands show ip ospf database Displays OSPF database information. 736 | Open Shortest Path First (OSPFv2 and OSPFv3)