HP 8550dn HP Color LaserJet 8550MFP Printer - Copy Module User Guide, Not Orde - Page 240
Energy Saver Adjustment, Return Directly to Standard Mode
UPC - 088698946428
View all HP 8550dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Note Energy Saver Adjustment Use Energy Saver Adjustment feature to determine the energy-saving level for the Energy Saver mode. This mode can be adjusted to one of the following increments: ! Return Directly to Standard Mode ! - 10% ! - 25% ! - 50% The -10%, -25%, and -50% settings save energy in the respective percentages when compared to the normal stand-by state. Return Directly To Standard Mode saves energy by approximately 2% when compared to the normal stand-by state. When the energy saving level is increased, it adds to the period of time required for the copy module to warm up and begin making copies. The waiting time for each setting is as follows: ! -10% setting: Approximately 2 min. ! -25% setting: Approximately 2 min. ! -50% setting: Approximately 3 min. 20 sec. The system will not return to the READY state if a print job is sent to the system while in Energy Saver mode is enabled. The factory default setting for Energy Saver Adjustment is -10%. 240 Chapter 8 Administration Functions EN