HP 8550dn HP Color LaserJet 8550MFP Printer - Copy Module User Guide, Not Orde - Page 78

Note Note Note The following types of originals can be used in the optional ADF: ! Original media weight: 50 to 105 g/m2 (15 to 28-lb) bond ! Original media size: 11 by 17 in, Legal, Letter, Executive, A4, A3 (Executive-size originals must be placed vertically.) ! Original tray capacity: 11 by 17 in, Legal, A3: up to 25 sheets (80 g/m2 or 20-lb bond) Letter, Executive, A4: up to 50 sheets (80 g/m2 or 20-lb bond) When originals are placed in the optional ADF, the copy module will automatically select the left output tray or the face-down output bin to output copies, depending on the selected copy settings. To change this setting, press ADMINISTRATION FUNCTIONS and then press CUSTOM COMMON SETTINGS (see "Copy Tray setting" on page 244). Do not use the following types of originals in the optional ADF: ! originals with tears, large holes, or binding holes ! severely curled originals or originals with sharp folds ! originals that are paper clipped or stapled ! transparencies or other highly transparent originals ! other originals that may not feed smoothly Color copies made with the copy module, or other originals that contain large quantities of toner, may not feed properly through the optional ADF. It is recommended that you use the glass when copying these types of originals. Check the condition of originals that have been repeatedly fed through the optional ADF. When making several copies using the same originals, the originals may become folded or wrinkled and may not feed smoothly. You cannot select the ACS (Automatic Color Selection) function when making copies using Tray 1 and selecting Transparency, Heavy Paper 2, or Glossy Film for the copy media material. Press FULL COLOR or BLACK on the copy module control panel. 78 Chapter 3 Common copying tasks EN