Intel S7000FC4UR Product Guide - Page 110
Removing and Installing the Processor Air Baffle, Removing the Processor Air Baffle
UPC - 735858194259
View all Intel S7000FC4UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
A B Figure 51. Installing the Top Cover AF002263 Removing and Installing the Processor Air Baffle Removing the Processor Air Baffle 1. Remove the top cover. For instructions, see "Removing the Top Cover" on page 90. 2. Disconnect the 100-pin cable from the front panel I/O board. See letter "B" in Figure 49 on page 89 to locate the connection point. 3. Hang the end of the cable over the side of the chassis where it will be out of the way. 4. Disconnect any cables attached to the device in the 5 ¼-inch peripheral bay. 5. Push the 5 ¼-inch drive bay tray or peripheral out of the front of the chassis. 6. Insert fingers into the holes on top of the air baffle. 7. Pull the baffle up and back to disengage the baffle from the two sheet metal tabs at the front of the baffle. Lift the baffle up to remove it. 92 Intel® Server System S7000FC4UR Product Guide