Intel S7000FC4UR Product Guide - Page 46

Video Support The main board uses the ATI* RN50 Embedded Video Controller with 32 MB of video RAM. The RN50 provides these features: • 2D/3D video accelerator • Dual DAC for simultaneous port support (front / rear video support) • Resolutions from VGA up to UXGA (1600 x 1200) • Digital Video Input/Output (DVI/DVO) interface routed to the Intel® Remote Management Module 2 (Intel® RMM) for KVM support up to 165 MHZ • 3.3 V 32-bit / 33 MHz PCI host interface The main board has a standard DB5 video connector. Ethernet Support 1000/100/10 Ethernet capability is supported by the ESB2 MAC and 82563EB PHY (Physical Layer). The ESB2 links to the PHY through a high-speed serial interface called Kumeran. The Kumeran interface consists of two sets of Tx/Rx pairs for a total of eight signals. The 82563EB PHY outputs two Gbit LAN ports and connects to a 1x2 RJ45 Gbit connector that is accessible at the rear of the system. Memory Board One, two, or four memory boards can be installed. Each memory board has eight DIMM sockets that support x4 or x8, single- or dual-rank FBD DDR2 DIMMs. FBD speeds of 533 MT/s (4-4-4, 5-5-5 latencies) and 667 MT/s (5-5-5 latency) are supported. DDR2 DRAM technologies of 512 Mbit, 1 Gbit, and 2 Gbit are supported. The memory boards connect to the main board through x16 PCI Express* connectors. The memory boards have LEDs that indicate the status of the memory board power and the status of each DIMM. 28 Intel® Server System S7000FC4UR Product Guide