Intel S7000FC4UR Product Guide - Page 124
Installing a CD-ROM / DVD-ROM Drive, Assembling the CD-ROM / DVD-ROM Drive and Carrier
UPC - 735858194259
View all Intel S7000FC4UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
8. Install a new CD-ROM / DVD-ROM drive into the carrier or slide the empty carrier into the server. 9. Install the top cover. For instructions, see "Installing the Top Cover" on page 91. Installing a CD-ROM / DVD-ROM Drive 1. Remove the top cover. For instructions, see "Removing the Top Cover" on page 90. 2. Remove the new drive from its protective wrapper, and place it component-side down on a clean ESD-protected work surface. 3. Record the drive model and serial numbers in your equipment log. 4. Attach the SATA-to-IDE converter board to the CD-ROM / DVD-ROM drive. See letter "A" in the following figure. 5. Place the left side of the drive into the drive carrier as shown in the following figure. See letter "B" in the figure. 6. Press the CD-ROM / DVD-ROM drive into the carrier until it is firmly secured. See letter "C". Figure 64. Assembling the CD-ROM / DVD-ROM Drive and Carrier 7. Insert the CD-ROM / DVD-ROM drive carrier assembly into the front opening in the chassis. See letter "A" in the following figure. 8. Plug the SATA cable and power cable into the converter board. See letter "B" in the figure. 9. Install the top cover. For instructions, see "Installing the Top Cover" on page 91. 106 Intel® Server System S7000FC4UR Product Guide