Intel S7000FC4UR Product Guide - Page 145

Replacing the SAS Backplane Board

Get Intel S7000FC4UR - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858194259
View all Intel S7000FC4UR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 145 highlights

13. Install your PCI Express* add-in cards. For instructions, see "Installing a Non-hotswap PCI Card" on page 75. 14. Install the memory boards and memory board air baffles. For instructions, see "Installing a Memory Board" on page 78. 15. Install the processor air baffle. For instructions, see "Installing the Processor Air Baffle" on page 94. 16. Connect any remaining cables to the main board. For the connection locations, see Figure 46 on page 87. 17. Install the top cover. For instructions, see "Installing the Top Cover" on page 91. Replacing the SAS Backplane Board The SAS backplane board is located behind the peripheral devices on the underside of the peripheral bay. Removing the SAS Backplane Board Caution: Before removing any hard drives, note their locations. Hard drives must be reinstalled in their original positions. Failure to reinstall the drives in the correct locations may result in a loss of data. 1. Remove all hot-swap hard drive carriers. For instructions, see "Removing a Hard Drive Carrier" on page 63. 2. Remove the top cover. For instructions, see "Removing the Top Cover" on page 90. 3. Remove the main board. For instructions, see "Removing the Main Board" on page 122. 4. Disconnect all cables attached to the SAS backplane. 5. Press the blue labeled latch that secures the SAS backplane board to the chassis and use the black plastic tab to lightly push the SAS backplane board toward the right side of the system. 6. Pull the backplane rearward to disengage the hooks. 7. Pull the SAS backplane upward to remove it. 8. Store the SAS backplane in an anti-static bag. 9. Install the replacement SAS backplane. For instructions, see "Installing the SAS Backplane Board" on page 128. Intel® Server System S7000FC4UR Product Guide 127

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
Intel® Server System S7000FC4UR Product Guide
127
13.
Install your PCI Express* add-in cards. For instructions, see
“Installing a Non-hot-
swap PCI Card” on page 75
.
14.
Install the memory boards and memory board air baffles. For instructions, see
“Installing a Memory Board” on page 78
.
15.
Install the processor air baffle. For instructions, see
“Installing the Processor Air
Baffle” on page 94
.
16.
Connect any remaining cables to the main board. For the connection locations, see
Figure 46 on page 87
.
17.
Install the top cover. For instructions, see
“Installing the Top Cover” on page 91
.
Replacing the SAS Backplane Board
The SAS backplane board is located behind the peripheral devices on the underside of the
peripheral bay.
Removing the SAS Backplane Board
Caution:
Before removing any hard drives, note their locations. Hard drives must be reinstalled in
their original positions. Failure to reinstall the drives in the correct locations may result
in a loss of data.
1.
Remove all hot-swap hard drive carriers. For instructions, see
“Removing a Hard
Drive Carrier” on page 63
.
2.
Remove the top cover. For instructions, see
“Removing the Top Cover” on page 90
.
3.
Remove the main board. For instructions, see
“Removing the Main Board” on
page 122
.
4.
Disconnect all cables attached to the SAS backplane.
5.
Press the blue labeled latch that secures the SAS backplane board to the chassis and
use the black plastic tab to lightly push the SAS backplane board toward the right
side of the system.
6.
Pull the backplane rearward to disengage the hooks.
7.
Pull the SAS backplane upward to remove it.
8.
Store the SAS backplane in an anti-static bag.
9.
Install the replacement SAS backplane. For instructions, see
“Installing the SAS
Backplane Board” on page 128
.