Intel S7000FC4UR Product Guide - Page 76

Removing the Top Cover, Removing the Chassis Cover

Get Intel S7000FC4UR - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858194259
View all Intel S7000FC4UR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

• Provide electrostatic discharge (ESD) protection by wearing an antistatic wrist strap attached to chassis ground of the system-any unpainted metal surface-when handling components. Removing the Top Cover Before removing the top cover, observe these safety guidelines: 1. If you are not replacing a hot-swap component: - Turn off and disconnect all peripheral devices connected to the server. - Power down the system by pressing and holding the power button on the front of the chassis for several seconds. - After the server shuts down, unplug both AC power cords to remove standby power from the system. 2. If the system is mounted in a rack, slide it out far enough to expose the entire top cover. 3. Unscrew the two captive screws on the faceplate. See letter "A" in the figure below. 4. Slide the top cover toward the rear until it stops, then lift the cover to remove it. See letter "B" in the figure. B A A Figure 22. Removing the Chassis Cover AF002233 58 Intel® Server System S7000FC4UR Product Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
58
Intel® Server System S7000FC4UR Product Guide
•
Provide electrostatic discharge (ESD) protection by wearing an antistatic wrist
strap attached to chassis ground of the system-any unpainted metal surface-when
handling components.
Removing the Top Cover
Before removing the top cover, observe these safety guidelines:
1.
If you are not replacing a hot-swap component:
—
Turn off and disconnect all peripheral devices connected to the server.
—
Power down the system by pressing and holding the power button on the front
of the chassis for several seconds.
—
After the server shuts down, unplug both AC power cords to remove standby
power from the system.
2.
If the system is mounted in a rack, slide it out far enough to expose the entire top
cover.
3.
Unscrew the two captive screws on the faceplate. See letter “A” in the figure below.
4.
Slide the top cover toward the rear until it stops, then lift the cover to remove it. See
letter “B” in the figure.
Figure 22. Removing the Chassis Cover
AF002233
B
A
A