Intel S7000FC4UR Product Guide - Page 127
Removing a 5 ¹-inch Peripheral Device, If installing a replacement device
UPC - 735858194259
View all Intel S7000FC4UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Figure 67. Installing 5 ¼ Peripheral Device into Server Removing a 5 ¼-inch Peripheral Device 1. Remove the top cover. For instructions, see "Removing the Top Cover" on page 90. 2. Push the tabs at each side of the peripheral device. See letter "A" in Figure 66 on page 108. 3. Hold the tabs in while pulling the peripheral device from the bay. See letter "B" in Figure 66. 4. Disconnect the power cable at the rear of the device. 5. Unscrew the slide rails from the 5 ¼-inch peripheral device. 6. Install the slide rails on the replacement device or install them on the 5 ¼-inch filler panel that came with your server. 7. If installing a replacement device, attach the Y-power cable to the device. 8. Slide the device or filler panel into the 5 ¼ bay until it clicks into place. See Figure 67 on page 109. Intel® Server System S7000FC4UR Product Guide 109