Intel S7000FC4UR Product Guide - Page 140
Replacing the Main Board
UPC - 735858194259
View all Intel S7000FC4UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Replacing the Main Board Removing the Main Board 1. Remove the top cover. For instructions, see "Removing the Top Cover" on page 90. 2. Remove the processor air baffle. For instructions, see "Removing the Processor Air Baffle" on page 92. 3. Remove the lower center air baffle. For instructions, see "Removing the Lower Air Baffle" on page 96. 4. Remove the SAS riser board. For instructions, see "Removing the SAS Riser Board" on page 99. 5. Remove the center brace. For instructions, see "Removing the Center Brace" on page 116. 6. Remove all PCI Express add-in cards. For instructions, see "Removing a Non-hotswap PCI Card" on page 74. 7. Remove the I/O riser board. For instructions, see "Removing the Front Panel Board" on page 131. 8. Remove all memory boards and memory board air baffles. For instructions, see "Removing a Memory Board" on page 76. 9. Remove all rear fans. For instructions, see "Hot-swapping a Rear System Fan" on page 60. Follow steps 2 and 3 only. 10. Remove the rear fan bays. To remove, pull out the blue latch on the fan bay and lift the fan bay from the system. 11. Remove all installed processors. For instructions, see "Handling the Intel® Xeon® Processor MP" on page 110 and then "Removing a Processor" on page 115. Follow steps 3 through 7 only. 12. Remove the plastic PCI slot dividers: a. A rivet is on each side of the divider assembly. Pull up on the two rivets. See letter "A" in the following figure. b. Lift the divider assembly from the server. See letter "B" in the figure. 122 Intel® Server System S7000FC4UR Product Guide