Intel S7000FC4UR Product Guide - Page 37
Hot-swap PCI Slots
UPC - 735858194259
View all Intel S7000FC4UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
For proper processor cooling, the processor duct must always be in place. Systems that are configured with fewer than four processors should have processor blanks installed to maintain proper cooling. Hot-swap PCI Slots The two hot-swap PCI slots have power and attention LEDs. The attention button is used to invoke a hot-swap sequence to remove or add an adapter without using the software interface. The LEDs are identified by the green arrow on the PCI divider label. Table 4. Hot-swap PCI Slot Power and Attention LED Green Power LED State Off On Blinking Amber Attention LED State Off On Blinking Definition Power off: Power has been removed from the slot. A card can be inserted or removed. Power on: The slot is powered on. A card cannot be inserted or removed. Power transition: The slot is powering up or down. A card cannot be inserted or removed. Definition Normal: Normal operation. Attention: Power fault or operational problem has occurred with this slot. Locate: The slot is being identified. Note: If you hot-remove a PCI card without following the proper procedure, power is automatically be turned off to the slot. Intel® Server System S7000FC4UR Product Guide 19