Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 111

System Settings Adjusting Auto Exposure Adjusting the median exposure for Auto Exposure by changing the reference exposure. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Adjust auto exposure and press [Change #]. System Menu / Counter Copy Default Default menu Select paper type(APS) Default drawer Drawer for cover paper Auto % Priority Setting Adjust auto exposure. System Menu Setting mode Plain 1st paper Multipurpose tray Off Standard Change # 3 Press [Lighter] if you desire to make copied images lighter or [Darker] if you desire to make copied images darker, when automatic exposure is selected. Adjust auto exposure. Adjust copy exposure default setting. (Auto) Lighter B ack Darker System Menu - Copy Default 4 Press [Close]. The touch panel will return to the Copy Default screen. Adjusting Automatic Exposure for Scanning Text Documents This menu allows the adjustment of the scanning exposure when the copier is installed with the optional scanner. Adjust the exposure so that the best readability is obtained when the scanned image is printed and processed with an OCR software application. NOTE: This setting is available only if the copier is equipped with the optional scanner kit. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Adjust auto exposure (OCR) and press [Change #]. System Menu / Counter Copy Default Default menu Default drawer Drawer for cover paper Auto % Priority Setting Adjust auto exposure. Adjust auto exposure(OCR) System Menu Setting mode 1st paper Multipurpose tray Off Standard Standard Change # 3 Press [Lighter] to make the scanned Adjust auto exposure(OCR) B ack image lighter or [Darker] to make the scanned image darker. Lighter Darker System Menu - Copy Default 3-11