Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 77

Copying Functions Original Orientation Specify the original orientation as follows. 1 On the [Basic] screen, press [Orig. Set Direction]. Ready to Job build. Place originals then press Start key. Job Build Step 11x8½" Select Paper Finished Basic 1 sided Original Type Auto % Reduce /Enlarge Quality 2 sided Copy 1 sided/ 2 sided Rear Orig. Set Direction Edit 1 sided copy-Left Finished page #: 2 Based on the original orientation, press to Job build. [Top Edge] ([Back Edge]) or [Left Top nals then press Start key. Edge] ([Left top corner]). tion NOTE: Failure to place originals correctly may result in copying errors. "Select Original Image Direction." can be shown at right side of display. Follow the steps. If setting mode is wrong, incorrect copy will result. Set Back Close Select Original Image Direction. Top Edge Left Top Edge 3 Press [Close]. Exposure Level Specify the copy exposure level as follows. 1 Press [Quality]. On the next screen, press [Exposure Mode]. Ready to Job build. Place originals then press Start key. Job Build Step Density 4 Exposure Mode Text + Photo Orig.Image Quality Off EcoPrint 1 sided copy-Left Finished page #: Basic Quality Edit 2 For automatic exposure adjustment, press [Auto]. To adjust the exposure Ready to Job build. Place originals then press Start key. manually, press [Manual]. Next, press Exposure Mode B ack [Lighter] or [Darker] to adjust the exposure. Auto Manual Lighter Darker 3 Press [Close]. 1-71