Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 132

Setting Time Difference Time Zone, Changing Management Code

Page 132 highlights

System Settings Setting Time Difference (Time Zone) Specifies the time zone in reference to Greenwich Mean Time. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Time difference and press [Change #]. System Menu / Counter Machine Default Default menu Select Copy output mode Key sound ON/OFF Silent Mode Date/Time Time difference System Menu Setting mode Tray A On Off 08/08/'04 07:00 GM T +09:00 Change # 3 Press [+] and [-] to select the time zone. Time difference B ack GM T +09:00 System Menu - Machine Default 4 Press [Close]. The touch panel will return to the Machine Default screen. Changing Management Code You can change the management code. IMPORTANT: Be sure to make a note of the management code when it is changed. NOTE: The default management code is 6000 for the 60 cpm model and 8000 for the 80 cpm model. The new management code must be a number comprising of four digits from 0000 to 9999. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for 60 cpm model and 80008000 for 80 cpm model. The new management code must be a number comprising of eight digits from 00000000 to 99999999. Avoid using an administrator code that is easily determined, such as '11111111' or '12345678'. Enter the following menu to make changes. - Default Settings for Copying - Common Default Settings - Job Accounting - Weekly Timer - Setting Document Management Defaults - Hard Disk Management - Printing Reports 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 3-32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212

System Settings
3-32
Setting Time Difference (Time Zone)
Specifies the time zone in reference to Greenwich Mean Time.
1
Access the
Machine Default
screen. (For instructions, refer to
Accessing the Machine Default
Screen
on page
3-20
.)
2
Press [
] or [
] to select
Time
difference
and press [Change #].
3
Press [+] and [-] to select the time zone.
4
Press [Close]. The touch panel will return to the
Machine Default
screen.
Changing Management Code
You can change the management code.
IMPORTANT:
Be sure to make a note of the management code when it is changed.
NOTE:
The default management code is 6000 for the 60 cpm model and 8000 for the 80 cpm
model.
The new management code must be a number comprising of four digits from 0000 to 9999.
When installing the optional security kit, enter the eight-digit management code. By default, the
management code is 60006000 for 60 cpm model and 80008000 for 80 cpm model. The new
management code must be a number comprising of eight digits from 00000000 to 99999999.
Avoid using an administrator code that is easily determined, such as ‘11111111’ or ‘12345678’.
Enter the following menu to make changes.
1
Access the
Machine Default
screen. (For instructions, refer to
Accessing the Machine Default
Screen
on page
3-20
.)
System Menu
Machine Default
Default menu
Select Copy output mode
Key sound ON/OFF
Silent Mode
Change #
Date/Time
Time difference
System Menu / Counter
Setting mode
Tray A
On
Off
08/08/'04 07:00
GMT+09:00
System Menu
Time difference
Machine Default
Back
GMT+09:00
-
-
Default Settings for Copying
-
Common Default Settings
-
Job Accounting
-
Weekly Timer
-
Setting Document Management Defaults
-
Hard Disk Management
-
Printing Reports