Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 134

System Settings Activating Auto Clear When this setting is activated, the copier reverts to the state after warm-up if no copies are made. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Auto Clear and press [Change #]. System Menu / Counter Machine Default Default menu Date/Time Time difference Management code change Auto sleep Auto Clear System Menu Setting mode 08/08/'04 07:03 GTM+09:00 On On Change # 3 Select [On] or [Off]. Auto Clear Back Returns to Default automaticalyy after copying is done or when the set time is passed after the last operation. Off On System Menu - Machine Default 4 Press [Close]. The touch panel will return to the Machine Default screen. Prioritizing Copying Over Printing You can assign a higher priority to processing copying jobs than printing jobs. NOTE: Copy Job Priority is displayed when installing the optional printer kit. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Copy Job Priority and press [Change #]. System Menu / Counter Machine Default Default menu Time difference Management code change Auto sleep Auto Clear Copy Job Priority System Menu Setting mode GTM+09:00 On On Off Change # 3 Select [On] or [Off]. Copy Job Priority Possible to make Copy Jobs priority instead of Print Jobs B ack Off On System Menu - Machine Default 4 Press [Close]. The touch panel will return to the Machine Default screen. 3-34