Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 125

4 Select [On] to allow duplex copying or [Off] to prohibit duplex copying to the custom paper type. Custom 1 Off On System Settings Back System Menu - Machine Default - Select paper type(2sided) 5 Press [Close]. 6 Press [Close]. The touch panel will return to the Machine Default screen. Making Copying on Letterhead Paper Easy Copying the original onto letterhead paper requires that the orientation of the original and the target paper match with each other. By switching [Adj(usting). Print Direction] on, the copier correctly prints the original onto the letterhead paper when the original and the letterhead paper are aligned with each other in the same orientation on the platen and in the paper cassette. This function also applies to prepunched and preprinted paper. Place the original and the letterhead paper as shown below. Portrait Original Landscape Paper Finished Copy Cassette MP tray Original Paper Finished Copy Cassette MP tray NOTE: Load paper in the cassette with the printing side facing down. When loading paper in the MP tray, load it with the printing side facing up. Copying with [Adj. Print Direction] activated may be slightly slower. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Special paper action mode (Specif. paper action mode) System Menu / Counter and press [Change #]. Machine Default Default menu Paper type (4th drawer) Check MP tray sizing Paper Type (paper weight) Select paper type(2sided) Special paper action mode System Menu Plain On Setting mode Adjust print direction Change # 3-25