Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 116

System Settings 3 Press [+] and [-] to specify the widths to Default erase width Back erase the borders. Adjust default setting of erase width. Border (0 2) ¼" Center (0 2) ½" System Menu - Copy Default The range for the width is as follows. Setting Range Inch models Metric models 0 to 2" (in 1/8" increments) 0 to 50 mm (in 1-mm increments) 4 Press [Close]. The touch panel will return to the Copy Default screen. Selecting Maximum Number of Copies You can limit the maximum number of copies from 1 to 9999. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Preset limit and press [Change #]. System Menu / Counter Copy Default Default menu Sort/Offset Auto Rotation Default margin width Default erase width Preset limit System Menu Setting mode Sort:On/Offset:Off Rotate Left ¼ " 0 " Border ¼ " Center ½ " Set Change # 3 Use the numeric keys to enter the Preset limit B ack maximum number of copies from 1 to Set output quantity. 9999. Set System Menu - Copy Default 4 Press [Close]. The touch panel will return to the Copy Default screen. Enabling Repeat Copy Repeat copy allows the printing of original documents which were copied and stored in the copier. You can enable or disable repeat copy and set it as the default. NOTE: This menu is not available when the copier is equipped with the optional security kit. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 3-16