Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 41

Copying Functions Booklets from Facing Pages Delivers booklets, such as a magazine, by adding front and back covers (with or without copying). The paper source to supply the paper for the cover is specified using the system menu. Refer to Specifying Cassette for Cover Paper on page 3-9. NOTE: The supported original sizes and paper sizes are as follows. Inch models Metric models Original Size 11 × 17" and 8 1/2 × 11" A3, B4, A4R, B5R, A5R and 8K Paper Size 11 × 17", 8 1/2 × 14", 11 × 8 1/2" and 8 1/2 × 11" A3, B4, A4, A4R, B5 and B5R If your copier is equipped with the optional document finisher, you can staple the booklet in the center margin. If the copier is also equipped with a folding unit, you can combine a center margin with folding at the center. The following paper sizes are supported when stapling the center margin or combining a center margin with center folding. Inch models Metric models Supported Paper Sizes 11 × 17", 8 1/2 × 14" and 8 1/2 × 11" A3, B4 and A4R Copying on covers The original for the cover is scanned first. When the finished copies are folded, that page will be copied onto the front and back covers. Originals Copies Blank covers When the finished copies are folded, both the front and back covers will be blank. Originals Follow the steps as below for this kind of booklet. 1 Place the originals and press [Function]. Copies 1-35