Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 165

7 Select Name to display and press [Change #]. New register Setting Item Account ID Name to display System Menu - Job 8 Enter the department name and press [End]. For instructions on entering characters, refer to Entering Characters on Touch Panel on page 3-55. Name to display Job Accounting Value 33333333 (No register) - Management Edit Change # Stop Limit:32 letters including # AllDel. Capital Letter Num./Sym. 9 When all entries are complete, press [Next]. IMPORTANT: An error will occur if you do not complete Account ID and Name to display. You will not be able to proceed to the next screen. Be sure that you have completed the entries. An error will occur if you attempt to enter an existing department ID code. You will not be able to proceed to the next screen. Use a different ID code or name. ng Item ay - Job Value Account ID 3st sales division - Management Edit Space Convert Cancel Change # Next 10 Specify restrictions on copying as desired. New register 33333333 3st sales division For instructions on restricting copier usage, refer to Restricting Usage Copier on page 4-6. Setting Item Copy Printer Output limitation Scanner transmission Value Permitted Permitted No limit No limit System Menu - Job - Management Edit 11 Press [Registr.] to finalize settings. To make settings on another department, press [Register] and repeat steps 4 to 11. 12 Press [Close]. The touch panel will return to the Job Accounting screen. Change # 4-5