Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 136
Weekly Timer
View all Kyocera KM-6030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
System Settings Weekly Timer The copier will automatically turn on and off at the specified times on the specified weekdays. This feature enables you to make copies immediately in the morning and frees you from the task of turning it off at night. NOTE: When using the Weekly Timer, leave the copier plugged in even when it is not in use. Keep the Main Power Switch on ( | position). For the Weekly Timer to work correctly, the time zone and date and time must be set correctly. For further details, refer to Setting Time Difference (Time Zone) on page 3-32 and Adjusting Date and Time on page 3-31. The weekly timer includes the following menus to adjust. Mode Weekly Timer Temporarily Cancel the Weekly Timer Weekly Timer On/Off Description Specifies the time to turn on and off the copier for each day of the week. Temporarily cancels the Weekly Timer for the specific days. This feature may be useful when you want to turn off the copier during holidays, etc., without losing the Weekly Timer settings. Activates or deactivates the Weekly Timer. Reference Page page 3-37 page 3-37 page 3-38 Accessing the Weekly timer (Week timer) Screen Follow the steps as below to begin adjusting the Weekly Timer by accessing the Weekly timer (Week timer) screen. 1 Press the System Menu/Counter key. 2 Press [Weekly timer] ([Week timer]). m Menu / Counter Document Management Language MP tray Setting Register Orig. Size Job Accounting BOX Management Print Report End Weekly timer Counter Check User Adjustment 3 Use the numeric keys to enter the Enter the administrator number. four-digit management code. By default, the management code is 6000 for the 60 cpm model and 8000 for the 80 cpm model. The Weekly timer (Week timer) screen will be displayed. 3-36 NOTE: For security, it is recommended to change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for the 80 cpm model. Proceed to the next section to make settings for the Weekly Timer.