Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 129

System Settings 2 Press [S] or [T] to select Auto Clear Time Setting and press [Change #]. System Menu / Counter Machine Default Default menu Special paper action mode Orig. Set Direction Sleep mode changing time Low power mode chng. time Auto Clear Time Setting System Menu Setting mode Adjust print direction Rear 90 Minute 15 Minute 90 Seconds 3 Use [+] to increase or [-] to decrease the auto clear timeout from 10 to 270 seconds. Auto Clear Time Setting Possible to set time to automatically return to default status after Copy is done or last operation 90 Seconds Change # Back System Menu - Machine Default 4 Press [Close]. The touch panel will return to the Machine Default screen. Selecting Output Destination You can specify the default destination for finished copies. Destination Auto Tray A Tray B Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Description Copies are sent to the empty tray. If multiple trays are empty, copies are sent to the bottom tray first and higher trays thereafter. Tray A of the document finisher. Tray B of the document finisher. This tray is not available if the multi-job tray is installed. Tray 1 (the first tray) of the multi-job tray. Tray 2 (the second tray) of the multi-job tray. Tray 3 (the third tray) of the multi-job tray. Tray 4 (the fourth tray) of the multi-job tray. Tray 5 (the fifth tray) of the multi-job tray. NOTE: This menu is available when the copier is equipped with the optional document finisher. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Select Copy output mode and press [Change #]. System Menu / Counter Machine Default Default menu Orig. Set Direction Sleep mode changing time Low power mode chng. time Auto Clear Time Setting Select Copy output mode System Menu Setting mode Rear 90 Minute 15 Minute 90 Seconds Tray A Change # 3-29