Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 127

System Settings Orientation of Original Document Specifying the orientation of the original document on the platen. This is accomplished by telling the copier the direction to which the top side of the original faces. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Orig. Set Direction and press [Change #]. System Menu / Counter Machine Default Default menu Check MP tray sizing Paper Type (paper weight) Select paper type(2sided) Special paper action mode Orig. Set Direction System Menu Setting mode On Adjust print direction Rear Change # 3 Select [Top Edge] ([Back Edge]) when Orig. Set Direction B ack the top of the original is facing towards Select default mode for Original set direction, the rear side of the copier or [Left Top Rear or Left top corner. Edge] ([Left top corner]) when the original is facing towards the left side of the copier. Top Edge Left Top Edge System Menu - Machine Default 4 Press [Close]. The touch panel will return to the Machine Default screen. Setting Sleep Timer Timeout The Sleep timer conserves energy when there is no operation on the operation panel or no data is received. This predetermines the period of time before the copier enters sleep mode. The Sleep timer can be set from 1 to 240 minutes in 1-minute increments. NOTE: If the copier is used frequently, we recommend using a longer timeout. If it is used infrequently, use a shorter timeout. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Sleep mode changing time and press [Change #]. System Menu / Counter Machine Default Default menu Paper Type (paper weight) Select paper type(2sided) Special paper action mode Orig. Set Direction Sleep mode changing time System Menu Setting mode Adjust print direction Rear 90 Minute Change # 3-27