Lexmark C750 Service Manual - Page 116

5060-00x 250 Paper jam Unable to clear the message-multipurpose feeder loaded. Step 1 Action and questions Make sure the media in the MPF meets specifications. Does the media meet specifications? Yes Go to step 2 No Inform user that the media in the MPF does not meet specifications. Go to "Tray 1 service check" on page 2-149. Correct the Paper Type setting. Properly load the media. 2 Does the media feed correctly from tray 1? Go to step 3 3 4 Is the Paper Type setting correct for media in the MPF? Check the media is loaded properly. The side restraint should not be too tight. The leading edge of the media should be sitting on the friction buckler. Is the media correctly loaded? Go to step 4 Go to step 5 5 Open the MPF to the horizontal position and check the paper path for obstructions. Is the paper path obstructed? Clear the obstruction Go to step 6 6 Raise the pick roll off the media and test the MPF. Does the pick roll turn? Go to step 8 Go to step 7 7 Open the lower jam access door, move the MPF bracket assembly gear to the lowest position and test the MPF. Does the MPF bracket assembly rise and engage the gear? Go to step 8 Replace the MPF bracket assembly. See "MPF bracket assembly" on page 7-21. Call your next level of support. 8 Does media jam on the friction buckler? Replace the friction buckler. See "Friction buckler" on page 4-31. 2-82 Service Manual