Lexmark C750 Service Manual - Page 67

5060-00x User primary message Priming Failed, Retry. GO/Stop User secondary message Explanation This message is displayed when an error has occurred during the printer staple priming operation. The following actions can be taken: • Press Go to initiate the priming operation again or • Press Return or Stop to cancel the priming operation. Note: If no action is taken and the printer Auto Continue setting is not disabled, the printer eventually clears the message, the priming operation is cancelled, and the printer resumes printing. Insert Staple Cartridge This message is displayed when the staple cartridge is missing or installed incorrectly. This message can be displayed at any of the following times, regardless of the Staple Alarm setting. • At POST • After the stapler door has been closed. The following actions can be taken: • Install the staple cartridge or • Press Go to ignore this message. The printer now handles staple jobs as if the staple unit were installed with no staples. The Staples Empty warning appears on the status line and Load Staples may immediately appears. Load Staples This message is displayed when the Staples Empty Alarm is activated and there are no staples in the staple unit or the staple unit is not installed. This message appears: • Prior to printing the first page of a batch of pages that are to be stapled or • During the printing of a batch of pages that are to be stapled (if the condition cannot be detected prior to printing the first page of the batch). The following actions can be taken: • A new staple cartridge may be installed to clear this message and start/continue printing the staple batch or • Ignore the Load Staples request for this print job by pressing Go or Select. The printer resumes printing, however the print job for which stapling was selected is not stapled or • Press Menu> or Menu< to access the Busy/Waiting Menu. The following functions are available using the Busy/Waiting Menu: • Cancel Job • Reset Printer • Reset Active Bin • Check Supply Levels Note: Menu Lockout does not prevent access to the Busy/ Waiting Menu. Diagnostic information 2-33