Lexmark C750 Service Manual - Page 138

5060-00x 5-Bin mailbox option service check Note: Make sure the option(s) are installed correctly and the printer is configured correctly. The majority of the mechanical components can be observed during operation by removing the left and right side covers. Step 1 2 Symptoms Problems with excessive static electricity buildup. Excessive static electricity buildup-Check the front cover assembly is firmly attached to the 5-bin mailbox frame and the ESD brush is not loose or damaged. Is the ESD brush ground cable correctly installed and the ESD brush not loose or broken? Yes Go to step 2 Make sure the brush is contacting the media being fed through the option. No Go to step 3 1. Attach the ground cable if not installed. 2. Replace the cover assembly if the ESD brush is loose or damaged. Go to step 4 3 The printer does not recognize one or more output options as installed. Go to "The printer does not recognize one or more output options as installed." on page 2-105 Go to "272 Paper jam - Check Bin x" on page 2-85 Go to "Ready Bin x Full message- may be able to clear message and paper feeds into bin selected." on page 2-106 Go to "Ready Bin x Full message- may be able to clear message and paper feeds into bin selected." on page 2-106 Go to "Bin x Full-no message that Bin x is full" on page 2-107 Go to "Ready Bin x Full displays and paper feeds into bin x" on page 2-107 Go to "Paper does not feed into the 5-Bin mailbox bin selected. 271 Paper Jam Check Bin 1 message" on page 2-106 4 271 Paper Jam - Check Bin 1 message Go to step 5 5 274 Paper Jam - Check Bin 4 displays. Go to step 6 6 Ready Bin x Full message-May be able to clear message and will feed paper into Bin selected. Go to step 7 7 Bin x Full - No message that Bin x is full Go to step 8 8 Ready - Bin x Full displays and paper feeds into Bin x Go to step 9 9 Paper does not feed into the bin selected. 271 Paper Jam - check bin 1 appears Go to step 10 2-104 Service Manual