Lexmark C750 Service Manual - Page 70
Lexmark C750 Manual
View all Lexmark C750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
5060-00x User primary message 36 Printer Service Required User secondary message Explanation This message is displayed when background toner prevents a completion of a TPS calibration cycle. Service is required to fix the problem. Press Go to clear the error. If the Service Printer message is displayed it means that a TPS failure has most likely occurred. The printer continues to operate but the color quality degrades. The most probable cause for this error message is a defective print cartridge or ITU. 37 Insufficient Collation Area This message is displayed when the printer memory and disk used to store pages is too full to collate the print job. The following actions can be taken: • Press Go to clear the message and continue collating the remaining pages of the job or • Press Menu> or Menu< to access the Busy/Waiting Menu. The following functions are available using the Busy/Waiting Menu. • Cancel Job • Reset Printer • Reset Active Bin • Check Supply Levels Note: Menu Lockout does NOT prevent access to the Busy/ Waiting Menu. 37 Insufficient Defrag Memory This message is displayed when insufficient printer memory is available to perform Flash Memory Defragment operation. This message appears prior to the actual start of the defragment operation. Press Go to clear the message. To perform the defragment operation you can: • Delete fonts, macros and other data in RAM • Install additional printer memory • Press Menu> or Menu< to access the Busy/Waiting Menu. The following functions are available using the Busy/Waiting Menu: • Cancel Job • Reset Printer • Reset Active Bin • Check Supply Levels Note: Menu Lockout does NOT prevent access to the Busy/ Waiting Menu. 2-36 Service Manual