Lexmark C750 Service Manual - Page 69

5060-00x User primary message 31 Defective Black Cartridge 31 Defective Yellow Cartridge 31 Defective Magenta Cartridge 31 Defective Cyan Cartridge 32 Unsupported 33 Calibration Error Cyan 33 Calibration Error Magenta 33 Calibration Error Yellow 33 Calibration Error Black 34 Incorrect Media Change MP Feeder User secondary message Explanation This message is displayed when the top cover is closed and a defective print cartridge is detected. It may take the printer 10 to 20 seconds to determine whether or not the print cartridge is installed. The printer may print pages during this 10 to 20 second interval. If pages are allowed to print, then they will not be reprinted once a valid print cartridge is inserted. Replace the defective print cartridge. This message is displayed when the front cover is closed with the wrong print cartridge installed. This message is displayed when the printer detects a calibration error for a particular color. This message displayed when the printer detects a media mismatch feeding from the MPF. Primary Message: Incorrect media detected Secondary Message: = Bond, Cardstock, Colored, Labels, Envelopes, Letterhead, Plain, Preprinted, Transparency, or Glossy. = Letter, Legal, B5, A4, Exec, Univ, A5, A3, 11x17, Folio, Stmt, 73/4, 9, 10, DL, C5, B5, or other. The following actions can be taken: • Replace the media in the MPF with the requested media and press Go or • Press Menu> or Menu< to access the Busy/Waiting Menu. The following functions are available using the Busy/Waiting Menu: • Cancel Job • Reset Printer • Reset Active Bin • Check Supply Levels Note: Menu Lockout does NOT prevent access to the Busy/ Waiting Menu. 34 Short Paper This message is displayed when the printer determines that the paper length is too short to print the data as formatted. The following actions can be taken: • Press Go to clear the error and continue printing pages or • Press Menu> or Menu< to access the Busy/Waiting Menu. The following functions are available using the Busy/Waiting Menu: • Cancel Job • Reset Printer • Reset Active Bin • Check Supply Levels Note: Menu Lockout does NOT prevent access to the Busy/ Waiting Menu. Diagnostic information 2-35