Lexmark C750 Service Manual - Page 303
Lexmark C750 Manual
View all Lexmark C750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
5060-00x Waste container latch removal See "Waste container latch" on page 7-18 for the part number. 1. Remove the paper size sensing assembly. See "Paper size sensing assembly removal" on page 4-48. 2. Use a flatblade screwdriver to release the waste container latch from the paper size sensing assembly. Web oiler fuser kit installation See "Fuser web oiler upgrade kit and replacements" on page 1-4 for the part number. 1. 2. 3. 4. Enter CE Diagnostic mode. Select Printer Setup. Select Configuration ID. Increase the last two digits each by four. Configuration ID =123456* The left digit blinks, indicating it is the first digit to be changed. Press Select to accept the current value and skip to the next digit. Change the two digits on the right to increase each of their values by four. For example, in this case, change 123456 to 12349A. To change the value of a digit, press Menu until the desired value is displayed and press Select. When the last (rightmost digit) is changed and Select is pressed, the new value is set. The printer automatically begins POR. Turn the printer off. Open the fuser access cover. 5. 6. Repair information 4-85