Lexmark C750 Service Manual - Page 59

5060-00x 2xx Paper jam message table Note: A secondary message only displays if the finisher option is installed. Use the "Sub error code table" on page 2-17 to help diagnose paper jam problems. 2xx code 200 Primary message Paper Jam Clear Paper Path (Jam location information) Secondary message Leave sheets in Finisher area 5 Description Primary: Paper is jammed at the printer input sensor. Open the printer left door to access the paper jam. If sheets have been accumulated to be stapled or offset when the jam occurred, the printer alternately flashes the primary and secondary messages to indicate that all accumulated sheets not be removed during the jam clearing procedure. If the problem persists, go to "200 Paper jam- Tray 1" on page 2-67. Secondary: When this message is displayed, do not remove accumulated sheets during the jam clearing procedure as the printer will not reprint the removed sheets. Also, if the accumulated sheets are removed, the portion of the job printed after the jam will not be stapled. 201 Paper Jam Clear Paper Path (Jam location information) Leave sheets in Finisher area 5 Primary: Paper is jammed at the fuser. Open the right door to access the jam area. If sheets have been accumulated to be stapled or offset when the jam occurred, the printer alternately flashes the primary and secondary messages to indicate that all accumulated sheets not be removed during the jam clearing procedure. If the problem persists, go to "201 Paper jam" on page 2-71. Secondary: When this message is displayed, do not remove accumulated sheets during the jam clearing procedure as the printer will not reprint the removed sheets. Also, if the accumulated sheets are removed, the portion of the job printed after the jam will not be stapled. 202 Paper Jam Clear Paper Path (Jam location information) Leave sheets in Finisher area 5 Primary: A paper jam has occurred at the fuser. Open the right door to access the jam area. If sheets have been accumulated to be stapled or offset when the jam is detected, the printer alternately flashes the primary and secondary messages to indicate that all accumulated sheets should not be removed during the jam clearing procedure. If the problem persists, go to "202 Paper jam" on page 2-73. Secondary: When this message is displayed, do not remove accumulated sheets during the jam clearing procedure. The printer will not reprint the removed sheets. Also, if the accumulated sheets are removed, the portion of the job printed after the jam will not be stapled. Diagnostic information 2-25