Lexmark C750 Service Manual - Page 235
Lexmark C750 Manual
View all Lexmark C750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
5060-00x Autocompensator pick assembly removal 1. 2. 3. 4. 5. Remove all cartridges. Remove the ITU. See "ITU assembly removal" on page 4-37. Remove tray 1. Remove the second transfer roll. See "Second transfer roll removal" on page 4-79. Remove the transfer plate. Lifting and rotating the right edge of the plate up to a 45° angle will release the transfer plate. Remove the grounding strap (A) attached to the bottom of the transfer plate. 6. Remove the black mylar piece by removing the two screws (B) or cutting the cable tie. B Repair information 4-17
Repair information
4-17
5060-00
x
Autocompensator pick assembly removal
1.
Remove all cartridges.
2.
Remove the ITU. See
“ITU assembly removal” on page 4-37
.
3.
Remove tray 1.
4.
Remove the second transfer roll. See
“Second transfer roll removal” on page 4-79
.
5.
Remove the transfer plate. Lifting and rotating the right edge of the plate up to a 45° angle will release the
transfer plate. Remove the grounding strap (A) attached to the bottom of the transfer plate.
6.
Remove the black mylar piece by removing the two screws (B) or cutting the cable tie.
B