Lexmark C750 Service Manual - Page 191

5060-00x Configuration Menu The Configuration Menu (CONFIG MENU) contains a set of menus, settings and operations which are infrequently used by a user. Generally, the options made available in this menu are used to configure a printer for operation. The following are available from the Configuration Menu: Black&White Lock Fuser Cnt Value Reset Fuser Cnt Prt Quality Pgs (This is not displayed if in Demo mode.) Color Trapping SIZE SENSING TYPE SENSING SENSED TRANS SENSED PAPER CALIBRATE TRAYS Panel Menus PPDS Emulation - This only displays if the PPDS interpreter is available. Download Emuls - This only displays if at least one Downloaded Emulator is installed. Demo Mode Factory Defaults Energy Conserve ITU Alignment Auto Color Adj Error Log Exit Config Menu (Press Select to exit CONFIG MENU and reboot.) Note: An asterisk(*) in the value list in the following menus indicates the default value. Entering CONFIG MENU To access to the CONFIG MENU: 1. Turn the printer off. 2. Press and hold Select and Return while you turn the printer on. 3. When Performing Self Test displays, release the buttons. Black&White Lock Select Black&White Lock from the CONFIG MENU. Values: =On =Off Fuser Cnt Value Select Fuser Cnt Value from the CONFIG MENU. You can not reset this value. It only displays if the Maintenance Warning and Intervention function is enabled in the printer Configuration ID. The value can be viewed by pressing Select. Diagnostic aids 3-7