Lexmark C750 Service Manual - Page 74

5060-00x User primary message 58 Too Many Disks Installed User secondary message Explanation This message is displayed when too many disks are installed. Note: Some configurations of different output options require the installation of one option before the other. 58 Too Many Flash Options This message is displayed when too many Flash Options are installed. Verify the maximum number of flash memory options which may be installed. Note: Press Go to clear the message. The extra flash memory options are ignored. 59 Incompatible Output Bin x 59 Incompatible Tray x These messages are displayed when the user installs an incompatible option. The following options may be incompatible for use on one or more 50xx models: • Output Bin x (x=1, 2 or 3) • Tray x (x=2,3,4 or 5) • Duplex The user is required to remove the incompatible option and press Go to clear the message. Note: If the user installed the incompatible option to satisfy a Check Option Connections/Reattach Option attendance condition, the user must reinstall an associated compatible option or hot unplug the option. 61 Defective Disk This message is displayed when the printer detects a defective disk. This error may occur at power on, or during disk format and write operations. Press Go to clear the message. The disk is marked as defective and normal printer operation continues. Disk operations are not allowed with a defective disk and the Format Disk menu item is not shown. 62 Disk Full This message is displayed when there is not enough free space on the disk to hold the data that have been requested to be written to the disk. This message is displayed for both resource collection and PostScript emulation when the disk is full. The following actions can be taken, however this deletes all downloaded Fonts and Macros not written to disk. • Press Go to clear the message and continue processing the print job • Press Menu to access the Busy/Waiting Menu The following functions may be available: • Cancel Job • Reset Printer • Reset Active Bin • Check Supply Levels Note: Menu Lockout does NOT prevent access to the Busy/ Waiting Menu. 63 Unformatted Disk This message is displayed when the printer detects an unformatted disk at POST. Press Go to clear the message. The disk is marked as bad and normal operation continues, however disk operation is not allowed until the disk is formatted. 2-40 Service Manual