Lexmark C750 Service Manual - Page 266

5060-00x Paper size sensing assembly removal See "Paper size sensing assembly" on page 7-57 for the part number. Note: The paper size sensing assembly contains components that easily fall apart as you remove the assembly. Be careful not to lose any of the components. 1. 2. 3. 4. 5. Remove the rear cover. See "Rear cover removal" on page 4-8. Remove the rear fan cover. See "Rear fan cover removal" on page 4-8. Remove the engine board shield. See "Engine board shield removal" on page 4-30. Open the waste toner container door and slide the container out. Remove the paper size sensor assembly screw type "323" on page 4-3 (A). Pick rolls See "Pick rolls (2 each per package)" on page 7-24 for the part number. Front roll 1. Wipe any toner or debris from the bottom pan to avoid contaminating the pick tires. 2. Pull the pick assembly down into the bottom pan and press the latch to remove the tire. Note: Do not attempt to remove either the shaft or the clutch races. 4-48 Service Manual