Samsung HMX-S10BN User Manual (user Manual) (ver.1.0) (English, Chinese) - Page 20

ENGLISH How to Use the Battery Pack Battery Pack Installation / Ejection / It is recommended to purchase one or more additional Battery Packs to allow continuous use of your Miniket Photo. Photo0 Miniket To insert the Battery Pack 1. Push the [OPEN] switch on the bottom side of the set in the direction of ! as shown in the diagram and open the lid.@ 2. Insert the Battery Pack into the battery slot until it softly clicks. Make sure that the SAMSUNG logo is facing up while the set is placed as shown in the diagram. ! Cover OPEN MENU ➮ @ 1. @0 2. 0 [OPEN] ! SAMSUNG 0 To eject the Battery Pack 1. Push the [Battery Lock Switch] in the direction as shown in the diagram to pop the Battery Pack out. 2. Pull the ejected Battery Pack out in the direction as shown in the diagram. Battery Lock Switch MENU ➮ MENU 1. [Battery Lock Switch] 0 2. 0 [ Notes ] ✤ Clean the terminals to remove any foreign substances before inserting the Battery Pack. ✤ If the Miniket Photo will not be in use for a while, remove the Battery Pack from the Miniket Photo. ✤ It is recommended to prepare fully charged additional Battery Packs for outdoor use. ✤ Additional Battery Packs are available at your local Samsung dealer and service center. [ ] ✤ ✤ 0 ✤ ✤ Miniket Photo 0 Miniket Photo 0 0 [ Warning ] [ ] ✤ When you eject the Battery Pack from the Miniket Photo, hold the ✤ Miniket Photo 0 20 Battery Pack so as not to drop it.