3Com 3C63311 Reference Guide - Page 106
Adding IMA Groups
View all 3Com 3C63311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
94 CHAPTER 4: CONFIGURING PATHBUILDER S330/S310 MODULES, PORTS, AND APPLICATIONS Figure 63 Add Group Menu (Adding UNI Group) 6 Select [1] Set Admin. Port(s). The following prompt appears at the bottom of the screen: Enter Admin Port(s): 7 Enter the port numbers for the T1/E1 port you want to include in the UNI group. 8 Select [2] Set Admin. Status and enter 2 to put the group in service. 9 Select [3] Previous Menu. 10 If desired, repeat steps 5-8 to set up a second UNI group and put it into service. Adding IMA Groups 1 From the Configuration Management menu, select [1] Manage Card to display the List Card menu, shown earlier in Figure 51. 2 From the List Card menu, select [3] DS1 UNI to open the T1 (DS1) UNI or E1 UNI Configuration menu, shown earlier in Figure 58. 3 From the T1 (DS1) UNI or E1 UNI Configuration menu, select [3] Group Configuration to display the Group menu, shown in Figure 64.