3Com 3C63311 Reference Guide - Page 96
CAUTION, When assigning shapers for VCM circuits, be sure that the shapers are
View all 3Com 3C63311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
84 CHAPTER 4: CONFIGURING PATHBUILDER S330/S310 MODULES, PORTS, AND APPLICATIONS CAUTION: When assigning shapers for VCM circuits, be sure that the shapers are wider than the bandwidth used for the voice traffic. To configure the MCPU shapers, follow these steps: 1 From the MCPU Card menu, shown in Figure 52, select [2] Shaper Configuration to display the MCPU Shaper screen, shown in Figure 53. The MCPU Shaper screen consists of a table listing the current shaper values in bits/second (bits for the maximum burst size shaper) and cells/second (cells for the maximum burst size shaper). Initially, the shapers are set to default values. Figure 53 MCPU Shaper Screen 2 To enter a new shaper value, use the arrow keys on your keyboard to move to the cell in the shaper table that you want to change. n To set a new Sustainable Cell Rate or Peak Cell Rate shaper, enter the new value in the bits/second (bps) column. The system automatically calculates the cells/second (cps) based on the value you enter. n To set a new Maximum Burst Size shaper, enter the new value in the cells column. The system automatically calculates the bits based on the value you enter.