3Com 3C63311 Reference Guide - Page 92
Updating the Flash File System, Resetting the Interface Card, Viewing an Equipment List
View all 3Com 3C63311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
80 CHAPTER 4: CONFIGURING PATHBUILDER S330/S310 MODULES, PORTS, AND APPLICATIONS Updating the Flash File System The flash file system contains system configuration information which is automatically saved in flash memory at a predetermined interval. To update the flash file system immediately, rather than at the next scheduled interval, follow these steps: 1 From the System Administration menu, select [8] Update Flash File System. The following prompt appears: Do you want to update the flash file system (Y/N) [N]? 2 Enter y to update the flash file system. CAUTION: The user configuration data is automatically saved into flash memory every minute. If there is a system failure (for example. a power failure), any changes that you make during the auto-saving interval will be lost. Thus, we recommend that you use the [8] Update Flash File System option, as described above, immediately after you make major configuration changes. Resetting the Interface The PathBuilder S330/S310 software allows you to reset only the MCPU interface Card card and the Voice Compression module (VCM) card. Resetting the MCPU reboots the system. To reset the MCPU interface card or the VCM card, follow these steps: If you reset the MCPU interface card, you will terminate your Telnet session. 1 From the System Administration menu, select [9] Reset Interface Card. You are prompted to select the card you want to reset. 2 Enter the option corresponding to the card you want to reset (MCPU or VCM). The following prompt appears: Are you sure you want to reset this card (Y/N) [N]? 3 Enter y to reset the selected card. Viewing an Equipment To view information about the modules currently installed on your PathBuilder List S330/S310: From the System Administration menu, select [10] Show Equipment List. Figure 49 shows a representative Equipment List. Figure 49 Equipment List