3Com 3C63311 Reference Guide - Page 80

68 CHAPTER 3: GETTING STARTED 3 Enter the following information (by selecting the appropriate options and responding to the prompts that appear at the bottom of the screen) to configure the trap client: IP Address-The IP address of the network management station to which you want the PathBuilder S330/S310 to send traps. Subnet Mask-The subnet mask for the network management station to which you want the PathBuilder S330/S310 to send traps. Port Number-The system-defined port number. You should not modify this number. (SNMP/UDP). 4 Select [4] Previous Menu to return to the Trap Client Configuration menu. 5 Select [5] Previous Menu to return to the Manage IP Network Configuration menu. Configuring the Default Gateway The default gateway routes IP data to non-local networks (Telnet sessions from different subnetworks). To configure the default gateway, follow these steps: 1 From the Manage IP Network Configuration menu, select [3] Default Gateway Configuration to display the Default Gateway Configuration menu, shown in Figure 41. 2 Enter the following information (by selecting the appropriate options and responding to the prompts that appear at the bottom of the screen) to configure the default gateway: IP Address-The IP address of the router which you want to configure as the default gateway. Subnet Mask-The subnet mask for the router which you want to configure as the default gateway. Figure 41 Default Gateway Configuration Menu 3 Select [3] Previous Menu to return to the Manage IP Network Configuration menu. 4 Select [4] Previous Menu to return to the System Administration menu.