3Com 3C63311 Reference Guide - Page 78
IP Address, Subnet Mask, Community Name,
View all 3Com 3C63311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
66 CHAPTER 3: GETTING STARTED 2 Select [1] Ethernet Port IP Configuration to display the Ethernet Port IP Configuration menu, shown in Figure 37. Figure 37 Ethernet Port IP Configuration Menu 3 Enter the following information (by selecting the appropriate options and responding to the prompts that appear at the bottom of the screen) to enable IP Ethernet connectors: IP Address-Provided by the network administrator. This is the IP address of the PathBuilder S330/S310 Management CPU. You should consult the network administrator to obtain an IP Address for the PathBuilder S330/S310 which will allow its 10BaseT Management port to co-exist with hosts on its local LAN. Subnet Mask-Provided by the network administrator. Community Name-Enter private (The community name applies to the SNMP SET operation.) Figure 38 shows a sample PathBuilder S330/S310 IP host setup. Figure 38 Sample PathBuilder S330/S310 IP Host Setup PathBuilder S330/S310 192.73.30.99 192.73.30.100 3Com Community 4 Select [4] Previous menu to return to the Local Host IP Configuration menu. 5 Select [2] Apply IP Configuration Changes to activate the IP address.