3Com 3C63311 Reference Guide - Page 47
Installing the Optional Modules in the Unit, CAUTION
View all 3Com 3C63311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Installation Procedures 35 Installing the Optional Modules in the Unit To install an option module in the unit, follow these steps: CAUTION: Many of the integrated circuits on the modules are sensitive to static electricity. When installing plug-in modules, always wear a properly-grounded anti-static wrist strap. 1 Turn off the power and unplug the unit. 2 Open the unit. a Remove the eight screws (three on each side and two in the rear), as shown in Figure 9. Figure 9 Removing the Eight Screws from the PathBuilder S330/S310 Unit b Push the cover back (arrow 1) and lift it up from the rear (arrow 2), as shown in Figure 10. Figure 10 Removing the PathBuilder S330/S310 Cover 2 1
Installation Procedures
35
Installing the Optional Modules in the Unit
To install an option module in the unit, follow these steps:
CAUTION:
Many of the integrated circuits on the modules are sensitive to static
electricity. When installing plug-in modules, always wear a properly-grounded
anti-static wrist strap.
1
Turn off the power and unplug the unit.
2
Open the unit.
a
Remove the eight screws (three on each side and two in the rear), as shown in
Figure 9.
Figure 9
Removing the Eight Screws from the PathBuilder S330/S310 Unit
b
Push the cover back (arrow 1) and lift it up from the rear (arrow 2), as shown in
Figure 10.
Figure 10
Removing the PathBuilder S330/S310 Cover
1
2