3Com 3C63311 Reference Guide - Page 81
Setting the Time and Date, Setting up Passwords, 2] Manage Time and Date
View all 3Com 3C63311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Performing Initial System Configuration 69 Setting the Time and To set the time and date, follow these steps: Date It is important to set the time and date accurately because these settings provide the timestamp for alarms. 1 From the System Administration menu, select [2] Manage Time and Date to display the Time and Date Configuration menu, shown in Figure 42. Figure 42 Time and Date Configuration Menu 2 Select [1] Set Date. The following prompt appears at the bottom of the screen: Enter Date (mm/dd/yy) 3 Enter the date. 4 Select [2] Set Time. The following prompt appears at the bottom of the screen: Enter Time (hh:mm:ss): 5 Enter the time. 6 Select [3] Previous Menu to return to the System Administration menu. 7 Select [11] Previous Menu to return to the Main menu. Setting up Passwords The PathBuilder S330/S310 supports a total of up to 10 logins at the following three access levels: Read-Only User-Can view information and configuration settings in the PathBuilder S330/S310 interface, but cannot set parameters or make any changes. Read-Write User-Can view and set/change configuration information. Super User-Can view and set/change configuration information and can perform the following super user functions: n Set passwords n Take over a read-write session n Erase the system database