3Com 3C63311 Reference Guide - Page 79
Configuring Trap Clients
View all 3Com 3C63311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Performing Initial System Configuration 67 The IP address does not take effect until you apply your changes by selecting [2] Apply IP Configuration Changes from the Local Host IP Configuration menu (step 5 above). Configuring Trap Clients Trap clients are the network management stations to which you want the PathBuilder S330/S310 to send traps. You can specify up to four trap clients. To configure trap clients, follow these steps: 1 From the Manage IP Network Configuration menu, select [2] Trap Client Configuration to display the Trap Client Configuration menu, shown in Figure 39. Figure 39 Trap Client Configuration Menu 2 Select the number corresponding to the trap client you want to configure. Figure 40 shows the menu for configuring trap client 1. Figure 40 Trap Client 1 Configuration Menu