Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 1198

• rate - The configured rate in packets per second. (Range: 0-14880000) • action shutdown-Places the interface in the D-disable state if the threshold is exceeded. • action trap-Logs a message and issue a trap if the threshold is exceeded. Default Configuration By default, broadcast storm control is disabled on all Ethernet interfaces. The default threshold for broadcast traffic is 5% of link bandwidth. The default behavior is to rate limit (drop) traffic exceeding the configured threshold. There is no default action. Command Mode Interface Configuration (Ethernet) mode, Interface Range mode User Guidelines Broadcast storm control can only be enabled on Ethernet interfaces. It cannot be configured on port channels. Setting the level, rate or action enables broadcast storm control. When enabled, broadcast storm control can issue a trap and drop traffic in excess of the configured rate (level) or shut down the port if the rate is exceeded. Either the level or the rate threshold may be configured, but not both. Either the trap action or the shutdown action may be specified, but not both. The trap action issues a log message and a trap when the configured threshold is exceeded. Traffic exceeding the threshold is dropped. The shutdown action shuts down the interface, puts the interface into the Ddisable state, issues a log message (WARNING) and a trap. The operator may bring the port back into service using the no shutdown command. Use the show storm-control action and show storm-control all commands to display the storm control settings. Security Commands 1198