Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 2262

As crash dump retrieval is not reliable on the front panel ports, the TFTP and FTP parameters are not available on the N1108EP-ON/N1500/N2200-ON Series switches. Use the USB crash dump capability instead. Example This example enables core dumps to a TFTP server 10.27.9.1 reachable over the out-of-band port. The core file is written to the "dumps" directory and the name includes the host name of the switch and the switch TOD. console(config)#exception dump tftp-server 10.27.9.1 file-path dumps console(config)#exception core-file Core hostname time-stamp console(config)#exception protocol tftp exception protocol Use the exception protocol command as directed by Dell Networking support to enable full core dumps. Use the no form of the command to disable full core dumps. Syntax exception protocol {local |tftp | ftp | usb | none} no exception protocol • local-Save the core file on the local file system. • tftp - Store the core dump on a TFTP server reachable on the out-of- band port. • ftp-Enable core transfer to an FTP server reachable on the out-of-band port. • user-name-The login id on the FTP server. • nopassword-The user id configured on the FTP server does not require a password. • password - the user id configured on the FTP server requires a password. • password-The password associated with the user id on the FTP server. • ip address-The IPv4 address of an FTP or TFTP server. • usb - Store the core dump on a USB device. A USB device must be inserted into the switch front panel. • none - Core dumps are disabled. Switch Management Commands 2262