Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 963

The Interim-Update packet contains the accounting information recorded for the user session since the last time an accounting record was sent. If both the periodic and newinfo keywords are configured, Interim-Update messages are sent whenever new information is available and when the periodic timer expires. Use the show authentication clients command to display the discovered IPv4 address/IPv6 address received from the RADIUS server, if any. Command History Command introduced in firmware release 6.5.2. aaa authentication dot1x default Use the aaa authentication dot1x default command in Global Configuration mode to specify an authentication method for 802.1x clients to access network resources. Use the no form of the command to return the authentication method to its default settings. Syntax aaa authentication dot1x default {ias|none|radius} no aaa authentication dot1x default The following methods may be configured: • ias-Use the internal authentication server user database for authentication. This method cannot be used in conjunction with any other method. • none-Do not use any authentication. • radius-Use the configured RADIUS server(s) for authentication. Default Configuration No default authentication method is defined, however, switch administrators are allowed access to the switch console via 802.1X. Use the dot1x user command to restrict the ports over which users (or switch administrators) may authenticate. Command Mode Global Configuration mode Security Commands 963