Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 2200

RMON Commands The Dell Networking SNMP component includes an RMON (remote monitoring) agent. RMON is a base technology used by network management applications to manage a network. Troubleshooting and network planning can be accomplished through the network management applications. The network monitor monitors traffic on a network and records selected portions of the network traffic and statistics. The collected traffic and statistics are retrieved using SNMP. The data collected is defined in the RMON MIB, RFC 2819. A device that supports gathering and reporting the RMON data is referred to as an RMON probe or RMON Agent. An RMON probe provides RMON data to an RMON Manager for analysis and presentation to the user. An RMON probe may be embedded in an existing network device or stand-alone. rmon alarm Use the rmon alarm command in Global Configuration mode to configure alarm conditions. To remove an alarm, use the no form of this command. See also the related show rmon alarm command. Syntax rmon alarm number variable interval {delta | absolute} rising-threshold value [event-number] falling-threshold value [event-number] [owner string] [startup direction] no rmon alarm number • number-The alarm index. (Range: 1-65535) • variable-A fully qualified SNMP object identifier that resolves to a particular instance of a MIB object. • interval-The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. (Range: 1- 2147483647) • rising-threshold value-Rising Threshold value. (Range: -2147483648 - 2147483647) • falling-threshold value-Falling Threshold value. (Range: -2147483648 - 2147483647) Switch Management Commands 2200