Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 1578

The command displays the following information. Parameter Description BGP Section: Routing Protocol BGP. Router ID The router ID configured for BGP. Local AS Number The AS number that the local router is in. BGP Admin Mode Whether BGP is globally enabled or disabled. Maximum Paths The maximum number of next hops in an internal or external BGP route. Distance The default administrative distance (or route preference) for external, internal, and locally-originated BGP routes. The table that follows lists ranges of neighbor addresses that have been configured to override the default distance with a neighborspecific distance. If a neighbor's address falls within one of these ranges, routes from that neighbor are assigned the configured distance. If a prefix list is configured, then the distance is only assigned to prefixes from the neighbor that are permitted by the prefix list. Prefix List In The global prefix list used to filter inbound routes from all neighbors. Prefix List Out The global prefix list used to filter outbound routes to all neighbors. Neighbors A list of configured neighbors and the inbound and outbound policies configured for each. OSPFv2 Section Routing Protocol OSPFv2. Router ID The router ID configured for OSPFv2. OSPF Admin Mode Whether OSPF is enabled or disabled globally. Maximum Paths The maximum number of next hops in an OSPF route. Routing for Networks The address ranges configured with an OSPF network command. Distance The administrative distance (or "route preference") for intraarea, inter-area, and external routes. Layer 3 Routing Commands 1578