Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 1749

• neighbor-id - Identifies the Router identifier of the neighbor. • encrypt - Use MD5 Encryption for an OSPF Virtual Link. • key - Authentication key for the specified interface. (Range: 8 bytes or less if the authentication type is simple and 16 bytes or less if the type is encrypt.) • key-id - Authentication key identifier for the authentication type encrypt. (Range: 0-255) Default Configuration This command has no default configuration. Command Mode Router OSPF Configuration mode. User Guidelines Unauthenticated interfaces cannot be configured with an authentication key. If no parameters are specified after the authentication keyword, then plaintext password authentication is used. Example The following example configures the authentication type and key for the area 10 OSPF virtual interface and neighbor ID. console(config-router)#area 10 virtual-link 192.168.2.7 authentication console(config-router)#area 10 virtual-link 192.168.2.7 authentication encrypt test123 1001010 area virtual-link dead-interval Use the area virtual-link dead-interval command in Router OSPF Configuration mode to configure the dead interval for the OSPF virtual interface on the virtual interface identified by area-id and neighbor router. Use the no form of the command to return the dead interval to the default value. Syntax area area-id virtual-link neighbor-id dead-interval seconds Layer 3 Routing Commands 1749